Specifications:-
Type: 8000pcs of 8g x 35mm Collated Winged Fasteners Warranty: N/A Brand: Multiboard
For fixing... Timber and Composite Boards to Metal.
Specially designed to enable the fastener to fix timber to metal without the timber rising to the top of the screw while the metal is being drilled. Features a flat head with reaming cutters in the underside to enable the head of the fastener to self-embed for a flush or recessed finish. The new, simplified Buidex Wing Teks range now have a new wing design,making them even quicker and easier to install. Dacrotized for providing greater protection in treated timbers.
How the Wing-Teks® Work The drill point drills the timber, as the wings counter bore the hole larger than the thread diameter. With the hole being larger the thread will not engage into the timber. After the Teks® point drills through the metal, the wings break off on contact with the metal. The thread cutting feature on the shank cuts a mating thread in the metal and the thread continues to engage. The head then clamps this material firmly together.
Maximum Timber Thickness: 20mm Minimum Steel Thickness: 1mm Maximum Steel Thickness: 2.5mm Rec Drill Type: 350-500W Select correct size drive bit: #2 Cross Recess Bit
Fit driver to a power screwdriver set to high approx. 2500rpm (Driving too slowly may result in the wings not breaking off. The hole will be too large and the thread won’t hold). Note. 14g screws set driver speed to 0-1000rpm.
Squeeze screwdriver trigger and maintain firm end pressure until the WingTeks® has drilled and fastened.
1 Box of 8,000 collated screws included. 8 boxes of 1,000pcs.
|